YN42021 heat distortion tester Wire 

 The machine used to test materials such as plastic and wire and leather hot deformation. Specific temperature, will 
 Specimens placed in the testing machine after 30 minutes free, then sandwiched between parallel plates of the machine, plus the required charge 
 Weight, with the temperature and then placed for 30 minutes, with a scale to measure their thickness difference before and after heating, the thickness difference 
 Divided by the thickness before heating, is the deformation rate. Meet UL1581, GB2099 standard form rate. Meet 
 UL1581, GB2099 standard 
 1, the test device: 3 groups 
 2, temperature: room temperature ~ 300 ℃ 
 3, weight: 50,100,200,500,1000 g of the three 
 4 Scale: Japan MITOTOYO 0.01/10mm 
 5, volume: inner box dimensions: length deep 400x 600x 360mm high 
 Carton Size: 1100x 1730mm wide and 620x high 
 6, the box Material: SUS # 304 stainless steel. 
 7, the outer box Material: 1.5mm steel plate, with electrostatic paint